Live Chat Software by Kayako |
Our software has a built-in Disaster Recovery feature. Here's how it
works.
After initial installation our Client software asks if you want to
make a Key Disk. The Key Disk contains all the setup information for
the Client software. If you change someth...
By default, the endpoint uses the C:TempRbackup location to prepare
files for backup. Check to make sure that this path exists.
If there is no Temp folder on C: then create one.
You can also change location of Temp Folder if you need to, on the
endpoi...
From Remote Backup Endpoint -> Options ->Preferences ->Connection tab.
Double-click on the small padlock icon on the connection info screen.
Enter Administrative (Override) password. The default is Admin
To get to the Account Group: double-click on wher...
We strongly recommend that you NOT run the endpoint in Services Mode.
Instead, use the default installation method which is to use Windows
Task Scheduler and the local System Account.
This procedure can be followed if you have trouble setting up the
end...
The Remote Backup system uses a couple of components that provide
encryption, and do not provide any feedback to the program that can be
displayed. The process is so quick that you don't notice this on small
files, but you may notice it even has a Task M...
Question: I assume that an Endpoint is one business that I am
serving, rather than the number of people that may be on their server
- true? Given that the number of clients that I can fit on one server
is limited (by diskspace), will the client license e...
The RBS Client (Endpoint) software can be customized and branded with
your own company name and logo, and 452 other features. You can do
this yourself using standard software tools that are shipped with the
RBackup software. There is no charge for brandi...
By Rob Cosgrove
CEO, Remote Backup Systems
This article describes the reasons RBS software can appear to run
slowly, or not at all, caused by issues unrelated to the software. If
your software is running slowly, please read this article. It contains
c...
Question: When the endpoint is intalled and running as a windows
service, I cannot access the mapped drives from the endpoint.
(rbClient does not see mapped drives)
Solution/WorkAround:
If you are running the endpoint in service mode, check the
permis...
It is not recommended to use Terminal Services to log into an
endpoint and run the Remote Backup software remotely. However, many do
it, and find out that a new instance of the RBS endpoint software
starts for every Terminal Services session.
The way t...
You can configure the batch files per backup set. You can create
custom batch files per backup set with filenames in the format of:
pre-{backupset name}.bat
post-{backupset name}.bat
For example, if the backup set name is "Blank" then, create batch
fi...
RBackup is a Windows product. The endpoint software will not run on
OSx.
It will, however, back up Mac files that are available as shares to a
Windows computer, or if you run RBackup in a Windows VM on OSx and the
VM has access to the Mac files.
If the backup is to change the archive bit, as it does by default
during FULL and INCREMENTAL backups, it will need permissions to write
to them.
Otherwise the backup will still run as read-only so long as it has
access to the TEMP folder where the work...
Error 10061 is a time-out error. It can be caused by the same things
that causes 10060 (below) and in addition, can be caused by a bad or
improperly configured router or firewall. 10060 - Connection Timed Out
- caused by mismatched port numbers, invalid ...
NOTE: THIS ARTICLE ONLY CONCERNS DIALUP INTERNET CONNECTIONS.
Error 11001 sometimes happens when you have incorrect settings that
affect how the RBS endpoint software dials an ISP.
Start the RBS Client software. Click OPTIONS > PREFERENCES >
CONNECTIO...
A 530 error is very specific, it simply means that the username,
password or account group provided do not match the server. This can
be caused by two things:
1) THE ACCOUNT INFORMATION IN THE CLIENT DOES NOT MATCH THE ACCOUNT
INFORMATION IN THE SERVER
...
Our most commonly reported problem is caused by not reading the
introductory document that displays when you install the Server
software, and not following the instructions to make an endpoint
installer. But, you're not alone and the problem is easy to fi...
Question: I have Included the entire E: drive with green check, but
specifically Excluded everything else under E:. However, there were
many system and hidden files/folders that got automatically selected
and were backed up.
Answer:
When you select the...
RBackup uses port 2774 by default. This is an Registered Port Number
assigned to Remote Backup Systems' RBackup. It is usually clear.
You can change the port number if you like. Some people use port 443
or 80, as long as they don't conflict with any oth...
Open the endpoint software.
Pick Options:Preferences.
Pick the Connection tab.
Double click the padlock icon.
Enter the password. The default is "admin".
Select the Backup tab.
Select the Create Support Pack button.
The software will create...
Open the client software.
Pick Options:Preferences.
Pick the Connection tab.
Double click the padlock icon.
Enter the password. The default is "admin".
Select the Backup tab.
Select the Create Key Disk button.
The Recovery is automatic. When you install the endpoint software for
the first time you create a Key Disk to use for recovery later. The
software prompts you for that.
To come up from a complete crash, install the endpoint software on a
new pc, (using...
To do this, use a combination of AutoSelect and specific file
selection.
This article describes making changes to the registry. If you are
uncomfortable doing that, please don't do it.
AFTER YOU HAVE ALREADY INSTALLED THE ENDPOINT SOFTWARE
Use this ...
There are two ways to perform the Disaster Recovery in case of hard drive failure or system crash. This article describes both.
1) Using the Encryption Key Disk/File:
First install a fresh client on the new system. When prompted for ÔÇÿNew Reg...
RBackup can be called from other programs. This allows it to be
included in other applications, adding Remote Backup functionality to
them. For example, suppose you'd like to include built-in remote
backup functionality in a Dental Office management pro...
Question: Have a prospective client that is security conscious. He wants assurance that there is not a ÔÇ£back doorÔÇØ into the Client Software making his systems accessible to your or my organization.
Answer: There is no ÔÇ£back door.ÔÇØ There is ...
Client reported having trouble with a particular customer whoÔÇÖs backups appeared to be skipping quickbooks files, which were very large. Other trouble included backup sessions that logged out and in again after 10 minutes or so.
The trouble was f...
Q: If I make a first time backup using the RBS endpoint software to a
portal USB drive at the customer's site, then I install it on the RBS
Server to the subscriber's directory, will they have access to it? or
How do you go about this?
A: If you make a...
This article describes the procedure for moving the RBackup Client software to another computer, after it has been running for a while on the original computer. This is done to maintain the original settings, encryption keys, and passwords.
Note: T...
If your server passed the Online Server Test with two green checks and you still have issues connecting with the client, re-check the following: Remote Backup Client -> Options -> Preferences -> Connection tab. Double-click the small padlock icon on t...
Rbackup, when installed as a Windows Service, logs in using the
default SYSTEM Account. There is a Server service registry parameter
that enables tighter security by allowing you to specify by name which
shares (and pipes) the system account can access.
...
The Client software will apparently load. The tray icon appears.
Right-clicking on tray icon brings up the normal quick-start menu.
However, the client software will not load when the Open Client option
is selected.
Because of a previous installation o...
If you are receiving a Type 13 Mismatch Error, this article will help
you repair the problem.
Automation Errors/Type Mismatch(13):
This may be due to some corrupt registry settings on the system or
some mismatched DLLs.
Perform the following steps ...
RBackup is Hybrid backup software. It can send backups to three
locations simultaneously or separately - the RBS Server, any local
location like a shared drive, and to cloud services like Google Drive,
Dropbox, and Amazon S3.
The first full backup is u...
Question: What is the amount of ram used up by the client?
Answer: It will run in 64 Meg, and works best with 128 or higher. It
works on all versions of Windows from Windows 95 up to the most
current operating systems, servers and workstations.
With RBackup the first backup of any new backup set is Full.
Thereafter, RBackup automatically switches to the Backup Method you
have chosen, which is usually Incremental.
You can do the first full backup using a portable hard drive. In the
RBackup Endp...
Question: Take this scenario. A client computer's hard drive running
a windows based OS crashes and must be replaced. A backup was
performed using your software the night before. Does the OS have to be
reinstalled to restore the data or can the OS, progr...
Solution 1:
The Error with 'IPC Port' is usually caused when the service
'ExchangeBackupService' is not running.
Check under Control Panel: Admin Tools: Services, and make sure that
the service 'ExchangeBackupService' is running. If the service is
sto...
If your client's initial backup is too large for an over-the-internet
transfer, give our Copy to Disk feature a shot. We specifically
designed this feature to make your large initial backups more simple
and convenient. For this procedure, make sure to tak...
Fast Pick: (File Selection Method)
Fast Pick is a File Selection method for Rbackup. This method is
designed to speed up the scanning process (or File Selection process),
especially in cases where there are many thousands of files to scan,
(greater than...
It doesn't matter what "backup type" you select when backing up
Exchange. The Exchange Agent will use it's own backup type.
Use the built-in Exchange Backup Agent to backup Exchange. Read the
Endpoint's documentation for more information on Exchange. T...
Use the built-in SQL Backup Agent to backup all SQL databases. If you
have more than one instance of SQL Server installed on a system,
backup the second instance as by creating a new backup set for the
second instance.
The built-in SQL backup agent alwa...
RBACKUP ENDPOINT REGISTRY SETTINGS
Three special files compose the bulk of your Endpoint's customized
installation. 1) backup.mdb, 2) rbackup.ini and 3) rbackup.reg.
This document covers the makeup and usage of the rbackup.reg (registry
file).
The r...
Error:
If the Exchange Backup Agent service is not installed and running,
you will see the following error message when connecting to Exchange
using the Exchange Backup Agent in the RBackup Endpoint software.
"Error occured in connecting to Exchange...
Performing disaster recovery for Exchange Server:
It is important that the new server has the same hardware, same version of the operating system and Windows folder and disk layout. The following link has more information on these requirements
http:/...
It is important that the new server has the same hardware, same
version of the operating system and Windows folder and disk layout.
The following link has more information on these requirements
http://support.microsoft.com/kb/249694
1.Perform disas...
NOTE: FOR LEGACY SYSTEMS ONLY
Exchange Backup was not running while temp path was on a NAS drive.
Normal backups were working fine.
Cause :
In Windows XP, Windows Server 2003, and earlier versions of Windows,
all services run in Session 0 along w...
There are two ways to exclude files globally. Both are explained in
the Server's help file, which you can read online at this link:
http://www.remote-backup.com/showme/rbackup/server/
[http://www.remote-backup.com/showme/rbackup/server/]
Files can be ...
From Remote Backup Endpoint -> Options ->Preferences ->Connection tab.
Double-click on the small padlock icon on the connection info screen.
Enter Administrative (Override) password. The default is Admin.
To get to the Account Group: double-click on whe...
Problem: On Exchange Server 2007 or 2010, the file selections
interface is missing Exchange DB-level (or database-level) node or
Active Directory (AD plugin) is missing.
Cause: Endlpoint fails to get the VSS panel Writer info from OS.
Resolution:
P...
Issue:
The Endpoint Locks settings on my Server in the Customize Endpoint
Installer - Endpoint Locks tab are all unchecked. After creating an
Endpoint Installer executable and running it on two different
machines, I see that several of the Endpoint Lock...
TaxWorks (Tax Works) is a professional tax preparation program. There
is an error in its update program that can possibly disable the
RBackup Endpoint software by improperly overwriting a DLL file common
to both programs with an older version, effectively...
Error Message:
VSS open files Backup failed. Error: The maximum number of volumes has
already been added to the shadow copy set. in BCVssOpenFilesProcess
The Error is thrown by VSS (Volume Shadow Copy Service). This error
is caused due to the followin...
SessionQuota, is the Endpoint-side session quota (set to Unlimited by
default). It defines the maximum amount of data an Endpoint can
transfer in a single backup session. If, during a backup session, the
amount of data being transferred exceeds the Sessi...
Following are the image requirements for branding the RBS Endpoint
software.
Note: There is an automatic Image Converter on the Partner's Portal
that can do this conversion for you. Log into the Partner's Portal,
select the Graphics Conversion Utility a...
Error: VSS open files backup failed. Error: The provider returned an unexpected error code. in BCVssOpenFilesProcess Client Version = 11.2.61 (& higher) This is often due to an old software package, i.e., backup exec, storagecraft, acronis etc. that ...
Eliminating VSS Error 8194 from Event Log:
When you start the Remote Backup program you may experience multiple
instances of VSS Error 8194 in the Application event log. These errors
DO NOT generally impact the ability of the program to perform online
ba...
EXCHANGE DB-LEVEL BACKUP - THRESHOLD OPTIONS:
Remote Backup uses Windows Volume Shadow Copy Service (VSS) to backup
Exchange 2003, 2007 and 2010. Snapshots of the Exchange files are
taken to ensure the consistency of the backup data. Once the snapshot
i...
FOLLOW THE STEPS OUTLINED BELOW TO RESTORE SYSTEM STATE/ACTIVE
DIRECTORY:
STEP 1: Is it the same machine, with a new hard drive? If yes, proceed
to Step 2, if not proceed to Step 8.
STEP 2: Make sure the Operating System and other software (third party...
VSS Error - Event 33, SideBySide in Application log (Event Log Error)
Error in backup log: 'Failure to backup open file'
The problem is the inability of the Endpoint module to load its VSS
libraries due to missing/redirected Visual C++ runtime library...
Who is the Service Provider? How do I find out who installed this
software?
Sometimes someone other than the Online Backup Service Provider works
on an end user's computer and finds the RBackup Endpoint software
running, and has questions about it.
Re...
Follow the steps given below on this Endpoint.
1. On RBS Client, go to Schedule--Backup Schedule.
2. Click on Apply and close.
Repeat the above two steps for all the available backup sets.
This will reinitialize the backup sets and force the clien...
Run Online Server tester from the RBS Server's Web Console.
Go to Setup -> Test Server
If online Server test is successful, run a Test Connection from any
Endpoint (Run -> Test Connection)
Also try to telnet from the Endpoint machine to RBS Server, ...
Use this procedure to manually remove all traces of the Rbackup
Endpoint. Normally the Add/Remove Programs should do all of this.
Follow the steps given below
IMPORTANT: If this is an existing Endpoint, take a copy of the
backup.mdb file from the Remo...
Copy to Disk is used to "seed" a first full backup that is too big to
do online in the amount of time required. If it fails, try this.
To run a copy-to-disk please follow the steps:
1.) Make sure the Attempt Window on the Schedule -> Backup Schedule
w...
The bottom line: Use Incremental for almost everything. Use BitBackup
for very large files that change only a little, like CAD drawings.
Incremental backup will scan for files' archive flags and backup the
files which have been changed since last backup...
We recommend using the Windows Task Scheduler option so that the
Windows service always runs in the background, even when you are not
logged onto the system. You don't need the Endpoint to be running in
service mode or in application mode. You can just cl...
Please follow the steps below::
1.) Close the Rbackup Endpoint completely. Stop rbackup.exe and
rbclient.exe via task manager (If running).
Open the Registry Editor (regedit.exe) and browse to the following
registry branch:
For 32 Bit:
HKEY_LOCAL_...
To exclude MailBox or Public Folder items by its full path, follow
these steps
1. Open Registry Editor (regedit.exe) and navigate to
HKEY_LOCAL_MACHINESOFTWAREQuantum Tech, Inc.Remote
BackupPluginsExchange Server and look for the ExcludeItems key.
2....
Check the Services panel to see if the RBS Endpoint Exchange Plugin
service (Exchange Backup Agent) is running.
If stopped or set as manual, change it to Automatic.
Now start the Endpoint and try to connect to the Exchange server.
There are two ways to grant permissions (work-arounds) for exchange.
Method 1 - Can be used to grant Administrator full access so new users
added later can also be accessed by the Rbackup Endpoint.
Method 2 - If you do not want Administrator to give f...
When files you expect to have backed up do not appear in the Restore
window, check the purge settings on the RBS Endpoint to make sure they
are correct. The most common cause for files missing from the restore
window is that the purge settings have been s...
Question: I want to bill my customers for the size of only the first
full backup, and not subsequent backups. Is there a report that will
do this?
Answer:
We do not have a report that gives only the size of a single full
backup on an ongoing basis. I ...
For a brand new backup set doing its first backup, the first backup
(online or to USB drive using Copy to Disk) is always Full regardless
what Backup Type you pick - Full, Incremental, Differential or Bit
Backup. It backs up everything selected, regardles...
The Endpoint software can be set to authenticate to the RBS Server,
and then send backups to Google Drive through Google Drive's folder
mapping application.
Use the Cloud Service feature. In this case the RBS Endpoints will
send their backups to separat...
This error is caused when the username or password or Account Group in
the Endpoint software does not match an account on the Server.
It can also be caused if the drive containing the backups for an
Endpoint goes offline or has a failure. This kind of e...
Your Server reports your IP address to our Server Locator, if you have
the Server Locator feature turned ON. It is ON by default. So, if your
Endpoints were installed to use the Server Locator to find your RBS
Server (there is a checkbox under the Server ...
MINIMUM REQUIREMENTS FOR RBACKUP ENDPOINT
The RBackup Endpoint software will run on any Windows operating system
XP or more recent. There is no minimum requirement for RAM.
BANDWIDTH
The Rbackup Endpoint is very efficient with bandwidth. It will work...
As of this edit RBackup and the Web PlugIns support seven languages:
English
Spanish
German
Portuguese
Hungarian
French
Italian
Albanian
There is a language editor built into the Web Manager, and you can add
new languages to the Endpoint...
RBackup software runs on Windows or a Windows VMWare instance.
The Endpoint software can back up shared Linux partitions if Windows
can access them through something like Samba.
Likewise the Rbackup Server software can use a Linux-managed drive
array ...
The Following are the list of folders included in Rbackup System State
backup. By default all the files inside these folders are backed up.
1."%SystemDrive%\Documents and Settings\ALL USERS\APPLICATION
DATA\MICROSOFT\CRYPTO\*",
2."%SystemRoot%\LastGoo...
ERROR MESSAGE:
Invalid object name sysdatabases when connecting sql server 2005
FIX:
Try adding the SQL server name after the server name
For example, if your server was named 'bigturnip' specify
'bigturnipsqlexpress' where sqlexpress is the insta...
The RBackup Endpoint can run batch files (command scripts) containing
commands and applications before a backup starts, and after a backup
ends.
PRE-RBS.BAT
post-rbs.bat
The above command scripts run globally - before and after every backup
set.
Y...
You can restore the full image backup just like any other restores. It
restores as a .vhd file which you can attach as a virtual disc or
launch it as a virtual machine.
Tool to Create Bootable USB Thumbdrive for Full Image Backup Restore -
Download and ...
HOW TO ADD A LANGUAGE TO THE ENDPOINT SOFTWARE
You can add a new language to the remote backup Endpoint (Simple
interface only) by customizing an .ini file. Here is the procedure.
Example: Add Russian language
On your RBS Server, create a new folde...
You can add a language in the Customize Client Installer. It will be
available in the Client's Simple Interface.
Follow the steps given below to add a language in the Customized
Client Installer.
1. Go to the RBS Server folder (By Default:C:Program Fi...
This article describes one method for restoring a backed up MS-SQL
database to an alternate location - a location other than the original
location. We realize that there are many reasons for restoring an SQL
database to an alternate location - to move it,...
RBackup's Key Escrow feature is on by default. You can turn it off on
a client-by-client basis with the following registry key:
HKLM- SOFTWARE - QUANTUM TECH, INC - REMOTE BACKUP - SETTINGS
KEYESCROW - POSSIBLE VALUES ARE "TRUE" AND "FALSE"
DEFAULT ...
The "Attempt Window" in the Endpoint's scheduling setup screens is set
by default to define the number of hours the Endpoint should attempt
to connect to its Server to do backups. If it hasn't been able to
connect by the end of the Attempt Window, it give...
If the Purge and Retention settings are incorrect, files can be backed
up and then purged too soon.
At the RBS Manager or your Server's Web Console (Web Manager), select
the affected Endpoint account and select Remote Manage.
Check the Purge/Retention...
The following PDF article contains instructions to perform full image
backups.
keywords: Full image backup, full image restore, restore drive,
restore volume, restore disk
SQL Server does not allow Differential Backup on the default database
(Master, Model, MSDB and Temp DB).
SQL Server does not allow us to backup the "Tempdb", which is clearly
stated in the backup log file when you try to back it up. See below
Error fr...
You can pause the backup whenever you want and you can resume the
backup. If your RBS Server is down for a day or if you want to pause
the backup during the business hours you can do it by changing
PauseMode registry key value on the Endpoint machine.
P...
How to turn off the first full backup
Sometimes you want to start a new backup Endpoint without backing up
everything first - you just want to start backing up files that are
added and modified from this day forward, without backing up existing
files.
...
Find below the instructions to Compact and Repair a corrupted Endpoint
database.
FileName: backup.mdb
File Location: Rbackup Endpoint installation folder (By Default:
C:Program FilesRemote Backup)
Please close the Endpoint completly. Kill the Endpoint ...
HOW DOES RBACKUP MANAGE BACKUP FILE RETENTION AND PURGING OF OLD
BACKUPS?
RBackup can be set to retain backups by the number of most recent
versions, and by number of days. In addition there are a number of
adjustments that you can make to the data rete...
You can limit bandwidth per Endpoint in your Server's Web Manager.
Select Accounts->Users->Manage Users.
Then select "Remote Mgmt" for the Endpoint you want to change.
Select the Backup/Report Options tab.
Select the "Bandwidth" you want to use for ...
To schedule a backup to run only during off hours - in the Backup Set
schedule, select a Start Time for when you want the backup to start,
and set the Attempt Window to a number of hours that you want the
backup to run. It's best to set it to stop an hour...
"SQL Server Backup Failed. Database: NFC_HR, Reason: Error occured in
Proc: ExecuteTSQL
Microsoft OLE DB Provider for SQL Server
Query timeout expiredCommand: BACKUP DATABASE "NFC_HR" TO
DISK='F:tempSQL ServerNFC_HR.rbsql' WITH NAME='Full Backup of NFC_HR...
Remote Backup can maintain a mirror of its online storage on a locally
attached network drive. When restoring, RBackup will first look for
files on its local mirror. This makes restores very fast and adds an
additional layer of redundancy. Files stored on...
Our software doesn't do just a simple copy, which would be much
quicker. It has to do encryption, compression, digital signing, and a
LOT of other things. Here is an article describing the process:
http://help.remote-backup.com/index.php?/Knowledgebase/...
You can localize the RBackup Endpoint's Simple Interface by editing an
.INI file and the Culture file.
To localize to client interface to Russian...
Create a new folder called "Russian" in /RBS Server/Client/culture/
/RBS Server/Client/culture/Russi...
Question: Is it possible to set the backup to stop after a period of
time? I want backups to stop before the start of the business day.
Answer: Yes. Add a registry key, and then set the Backup Window (In
the backup sets schedule screen) to the number of...
The Personal Edition does not have the ability for end users to change
file selections. Partners, however, can. There are two ways to do it.
FOR ONE ENDPOINT ONLY
* Using the Web Manager, change your target endpoint's account from
Personal to Server...
This article shows you how to mount a .VHD file produced by RBackup.
(Alternate keywords: spin up boot deploy )
In version 11.12, RBackup can create a full disk image of a hard
drive. The "image" is a file that ends in ".VHD" and is stored in the
Imag...
Please see the attached files to configure Automatic Upgrades in
Endpoint.
How long does it take to do a Full Image Backup?
Assuming that you are backing up from typical DAS to an external USB3
drive, and the host computer isn't that bogged down, you should be
able to average 40GB/hour.
This will depend on a lot of factors l...
Error 10060 is a time-out error. It can be caused by a bad or
improperly configured router or firewall. 10060 - Connection Timed Out
- caused by mismatched port numbers, invalid IP address, or Server not
turned on, among other things.
This error is cau...
To Enable New backup Engine
Go to Options>Preferences and then double-click the padlock icon and
enter the password ("Admin" with a capital "A" by default).
Now go to Admin Options-->Advanced Options-->Enable Switch Backup
Engine.
Apply the settings...
Now you can change the log level while the backup is running by
creating file "settings.ini" in Remote Backup install folder. (By
default C:Program Files (x86)Remote Backup) with the following
information.
[settings]
NPLog=True
LogLevel=3
THE PURGE/RETENTION SETTINGS & ADV. OPTIONS SUB-TAB CONTAINS THE
FOLLOWING SETTINGS:
TO CHECK THE PURGE SETTINGS ON RBS CLIENT:
Go to Options--Preferences and then double-click the padlock icon and
enter the password ("Admin" with a capital "A" by defa...
Throttling Bandwidth of individual clients can be done from the RBS
Manager itself. On your RBS Server Manager click on the Accounts Tab,
once it loads Right-Click on the Client and select the option "Remote
Manage". The Endpoint Remote Management window ...
Windows Defender can sometimes slows down and impact backups and
restores.
Paste the lines below (this is an example) into an admin command
prompt and it will add in exclusions to bypass Defender Scans. (There
may be other programs to exclude, but this ...
Please find the attached documents to backup client data to Amazon S3
and Google Drive.
Amazon S3: Each client can have their data backed up to multiple S3
Bucket or Amazon account settings configured for each backup set.
Google Drive: Each client can...
Please add these list of files and folders to your AntiVirus or
Firewall.
Processes to Exclude:
C:Program Files (x86)Remote Backuprbclient.exe
C:Program Files (x86)Remote Backuprclient.exe
C:Program Files (x86)Remote Backuprbbackupprogress.exe
C:Program...
EXCP(STARTPREPRATIONTHREAD()) EX: EXCEPTION OF TYPE
'SYSTEM.OUTOFMEMORYEXCEPTION'
Add the following exceptions to Antivirus:
Folders to Exclude:
* Default Bit Backup temporary folder
C:Temprbackupbitbackup
* Default installation folder C:Pr...
You will receive this message when you are backing up files more than
20480 M.B. To work around this follow the steps given below
* Please close the client and also End Tasks of rbclient.exe or
rbackup.exe from the task manager.
* Locate the file na...
Online Backup Software by Remote Backup Systems fusion